Pentair Heater Thermistor Probe 471566

Pentair Pentair Heater Thermistor Probe 471566

Pentair Heater Thermistor Probe 471566 Pentair , Price: - Pentair Heater Thermistor Probe

471566 Pentair...Continue reading for Pentair Heater Thermistor Probe 471566

Aprilaire 600A Whole House Digital Bypass Humidifier

Aprilaire Aprilaire 600A Whole House Digital Bypass Humidifier

Aprilaire 600A Whole House Digital Bypass Humidifier Aprilaire , Price: - The Aprilaire 600A is easier than ever to install because it includes a built-in bypass damper, which means fewer parts to install. Plus, the damper is conveniently labeled for summer and winter settings, allowing you to set it for the entire season with no guesswork involved. This humidifier can be installed on the supply or return air ductwork. It is also left or right side reversible. Includes humidistat controller, sensing bulb, one water panel (humidifier pad), one replacement water panel (humidifier pad), and transformer. Aprilaire weather station is receivable upon completing registration card. Electrical: 24V-60Hz-0.5 AMP Drain Connection: 1/2 inch I.D. plastic hose direct to drain fitting on unit Plenum opening size is 9 3/4"W X 12 1/2"H Other items needed for the installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 6" round ducting & elbow for bypass air, 2-conductor 18 to 22 gauge wire. This is available for purchase. Product Specifications Maximum Coverage Area- 4,000 square feet Maximum coverage area means this humidifier will perform well for home sizes up to the square footage indicated, provided that the home is "tight". A tight home is typically is one that is sealed well around windows and doors and does not leak air to/from the outdoors. Note that humidifiers will perform well for smaller homes as well since the controller regulates the amount of humidity automatically to adjust to home size. Type - Bypass There Aprilaire...Continue reading for Aprilaire 600A Whole House Digital Bypass Humidifier

Kendrick Dew Remover Heater for 3" Telescopes, & Tubes from 3.5" to 5" OD (90mm to 130mm OD)

Kendrick Kendrick Dew Remover Heater for 3" Telescopes, & Tubes from 3.5" to 5" OD (90mm to 130mm OD)

Kendrick Dew Remover Heater for 3" Telescopes, & Tubes from 3.5" to 5" OD (90mm to 130mm OD) Kendrick , Price: - The Kendrick Dew Remover System is centered around the standard controller, which is required for activating the heater. (not included) The heaters have been built to use only as much power as necessary and thereby not waste energy. They have sponge insulation on one side to prevent heat being lost into the atmosphere. The heat is directed into the optics instead and because of this, less energy is needed to keep your optics moisture free. The heaters wrap around your objectives, label side out and are held in place by elastic/Velcro attachments. (Telrad heaters are held in place with an elastic band. The heaters for secondary mirrors are placed on the backside of the secondary and can be held in place by using the polyester batting found inside the secondary mirror holder. The .965", 1.25" and 2" are considered eyepiece heaters. The 2" are also heaters for camera lenses and certain binoculars.) Kendrick...Continue reading for Kendrick Dew Remover Heater for 3" Telescopes, & Tubes from 3.5" to 5" OD (90mm to 130mm OD)

JBJ TrueTemp Digital Heater Controller

JBJ Lighting JBJ TrueTemp Digital Heater Controller

JBJ TrueTemp Digital Heater Controller JBJ Lighting , Price: $120.99 - JBJ TrueTemp Digital Heater ControllerJBJ`s TrueTemp digital heater controller is the most accurate & precise controller available. Plus/Minus 0.5F Accuracy 0-99.9F Temperature Range HIGH & LOW Temperature Alert Calibration Feature Up to 1000 Watt Capacity (Heaters) Quick Disconnect temperature probe Advanced Microprocessor JBJ Lighting...Continue reading for JBJ TrueTemp Digital Heater Controller

Mini USB Solar Charger Connector Cell Phone Blue

ETHAHE Mini USB Solar Charger Connector Cell Phone Blue

Mini USB Solar Charger Connector Cell Phone Blue ETHAHE , Price: $53.60 - ·Versatile with as many as 4 different connectors/tips, compatible with most cell phones, PSPs, MP3/MP4s, PDAs, digital cameras, electronic dictionaries, IPAQs
·Specification: Input: AC100V-240V Output: 5.5V 400-800mA In-built Lithium Battery: 1500 mAh
·Compatibility list: Connector/Tip 1: 2 mm round pin, suitable for Nokia phones Connector/Tip 2: 3.5 mm round pin, suitable for NK02 Nokia phones Connector/Tip 3: Wide connector, suitable for Sony Ericsson phones Connector/Tip 4: Mini USB, suitable for HTC phones, Blackberries and Motorola phones Female USB cable: suitable for all devices that can be charged from USB ports
·Package Included: Solar Panel x 1 AC Adapter x 1 Mini USB to USB Cable x 1 Mini USB to Female USB Cable x 1 Mini USB Output Cable x 1 Connectors x 4
·Usage:
·Simply slide the switch on the right side of the solar panel to turn on/off the solar charger 1. Pre-charging the solar charger: a, Place the solar panel under sunlight, the charger will transfer sunlight into electric power . It takes 10-15 hours for the battery to be fully charged b, or,pre-charge the solar charger with AC adapter. c, or, pre-charge the solar charger from USB ports. Pick out the Mini-USB to USB cable. 2. Charging cell phones and other digital devices with the solar charger: a, Select from the four connectors the right connector/tip that goes with your cell phone or other digital devices. Fit the connector onto the correct end of Mini-USB output cable (the one with the hole), and then insert the Mini-USB tip into the "in/out" jack of the solar charger b, or, for devices charged from USB ports, pick out the USB female cable for connection.
·Notice: 1. For the first two times users are advised to charge the solar charger with AC110V-240V power for 15 hours straight to fully activate the capacity of the battery 2. For safety's sake, please do NOT use OTHER AC adapters ETHAHE...Continue reading for Mini USB Solar Charger Connector Cell Phone Blue

WIN100 Heating & Cooling Programmable Outlet Thermostat

Lux WIN100-005 WIN100 Heating & Cooling Programmable Outlet Thermostat

WIN100 Heating & Cooling Programmable Outlet Thermostat Lux WIN100-005, Price: $59.99 - The WIN100 is a Heating or Cooling Programmable Thermostat for Window Air Conditioners and Electric Space Heaters. It plugs into a normal household receptacle outlet. Electrical Rating is 120 volt, 15 Amp. Accurate Temperature Control while Saving Energy. Weekdays and Weekends can be programmed differently. Our unique, user-friendly Speed Dial ® allows a beginner to get expert results. The WIN100 is armchair programmable which means you can program it without it being plugged into the wall. Pre-set with a typical energy saving program, the innovative WIN100 also offers easy reprogramming to fit any lifestyle.

ETL Approved,
Energy Star Approved,
Easy To Re-Program,
4 Periods per Day,
On-Screen Programming,
Temporary Override,
Vacation Hold,
12 Hour Clock Only,
Positive On/Off Switch,
User Temperature Calibration,
On-Screen Low Battery Indicator,
Adjustable Cycle Rate,
Fahrenheit or Celsius, WIN100-005 Lux...Continue reading for WIN100 Heating & Cooling Programmable Outlet Thermostat

Splash Spa A5500

Wholesale Air Spa Controller - Hot Tub Control Pack - Heater Pump

Buy discount Air Spa Controller - Hot Tub Control Pack - Heater Pump Our spa controls will work with your spa whether you are replacing or upgrading your hot tub control system.PLEASE MESSAGE US TO CUSTOMIZE YOUR SPA PACK OR TO INCLUDE OPTIONAL FEATURES.Custom built spa controller system for your exact requirements.Built to your specifications (110V, 220V, 1 Pump, 2 Pumps, Ozonator, Air Blower, or ALL)OPERATING FEATURESWhile our competitors only have maximum compatibility to run 3 components only (one ... »» Read more about Air Spa Controller - Hot Tub Control Pack - Heater Pump.

Price: $399.00 » Get Your Discount

White Rodgers White Rodgers

Buying online White Rodgers 36C72U-185 Gas Water Heater Control for Natural Gas

Best price White Rodgers 36C72U-185 Gas Water Heater Control for Natural Gas Gas Water Heater Control, For LP Gas Only, 1/2" N.P.T. Inlet, 1/2" Inverted Flare Outlet With Left Hand Thread, 70°F-160°F Range, Fully Regulated Main And Pilot Regulators Fixed At 10.0" W.C. Single Cycle E.C.O. Set At 195°F »» Read more about White Rodgers 36C72U-185 Gas Water Heater Control for Natural Gas.

Price: $339.07 » Get Your Discount

Generac 5870

Where can I buy Generac 5870 8,000 Watt Air-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator With Transfer Switch (CARB Compliant)

Generac Guardian 5870By Anthony L. MaiuriI purchased the Generac 5870 Generator in July 2010. It arrived by CEVA freight and the driver dropped it off 10 feet from the site that I prepared for it. Upon inspection it was in great condition except for a small ding at the base of the unit; no problem just cosmetic. I decided to keep it versus send it back and wait for a new one. It came with a 5 foot electrical tail protruding from the generator and two tails protruding from the transfer switch (a two foot tail that attaches to your main distribution panel and a 30 foot tail that connects to the generator's 5 foot tail via a connection box). Instructions are well written and easy to follow. I am a retired IT Executive with some knowledge about electrical connections so I did the electrical hookup myself. The gas connection I sub-contracted to a local propane service agent. I am glad I did as the gas connection line depends on the distance from the propane tank to the generator and the number of appliances and associated BTU's that are hanging off the gas line that you want to connect to. Because I was on the cusp of exceeding the exisitng gas line capacity, I decided to run a separate one inch gas line to where the propane tank line enters the house. Since an additional regulator and line was required, the existing piping and regulator had to be re-piped and teed. Switching the generator from natural gas to propane is very easy. Just place the T-handle into the slot located on the air breather housing inside the generator, pull it out (spring tension), and turn clockwise 90 degrees. The orfice is now good to go for propane. The gas contractor charged $98 an hour plus parts. It took him 4 hours (@400). I haven't receive the bill yet for the parts. Also, the amount, length, gender, and threads of nipples and pipe connectors required are numerous when running a separate line. While plumbing the generator is less complex than the electrical, I recommend having the gas connection done by a professional as they have the tools, knowledge, parts, and meters, to ensure a seemless gas connection to the unit.Prior to activating the generator, you will need to logon to Generac's site to obtain an activtion code. I did this but upon entering the code via the generator's controller, it wouldn't accept it. The instructions state that if this happens to call them. I did so, (9:30 PM on a Monday night), and a generac representaive gave me a new code. The test was successful with out any issue. One other point. The 5870 transfer switch/subpanel comes pre-wired with associated breakers; two 240 volts (one 20 amps, the other 30 amps), six 120 volts (three 15 amps, three 20 amps). There are also 240 volt/70 amp wires that run from the transfer/sub-panel switch to your main distribution panel. Generac doesn't supply the 70 amp breaker required to connect these wires into your main distribution panel;($33 at Home Depot.). Also, you will need to buy the battery that starts the generator (@$70 at Walmart). Since the pre-wired/breakers didn't exactly match the circuits ... »» Read more about Generac 5870 8,000 Watt Air-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator With Transfer Switch (CARB Compliant).

Price: $2,742.00 » Get Your Discount

Rinnai R75LSe-N

Where can I find Rinnai R75LSe Natural Gas Tankless Water Heater, 7.5 GPM

Rinnai R75SleBy Tyler L. ColeKeep in mind I have only recently installed my Rinnai on-demand water heater. It works perfectly. It comes with the water temp. set @ 120 degrees. Your installer will probably not re-set the temerature higher since it may be against state law. You'll have to do it yourself. It's not complicated but you'll have to find the tiny row of red buttons inside the unit. They are found on the right side of the unit as facing it. I wanted an outdoor unit since I did not want the expense of venting it that is required with an inside unit. Also safer. Think about your winter temperatures. I purchased a pipe-enclosure unit that attaches to the bottom of your water heater. Stuff it with insulation. I used the kind that comes on a roll. Doing this will protect your pipe assembly unit from wind, freezing, and critters. The unit itself is protected to minus 30 degrees. I found that 125 degree hot water is perfect. 120 is not enough. You'll love endless hot water. You can buy a flushing kit called Flow-Aide from Whitlam...[...]. It your water is somewhat hard you will want to flush your unit once or twice a year. It disolves lime, water scale and deposits in the applicance. If your water is extremely hard you ought to consider a house water filter and sediment filter. This is true especially if you have a well such a I do. The flushing kit comes with hoses, pump, bucket and flow-aide chemical. Make sure you buy a unit that is large enough to handle your needs. If you don't have a 2PSI gas service you will need to use a 3/4" dedicated gas line to your unit. We love it, so far.9 of 9 people found the following review helpful. »» Read more about Rinnai R75LSe Natural Gas Tankless Water Heater, 7.5 GPM.

Price: $1,224.00 » Get Your Discount